Author Type

Graduate Student

Date of Award

2018

Document Type

Thesis

Publication Status

Version of Record

Submission Date

October 2026

Thesis/Dissertation Advisor [Chair]

Engeberg, Erik

Abstract

This thesis concerns the design, construction, control, and testing of soft robotic actuators to be used in a soft robotic exoskeleton; the Boa Exoskeleton could be used for joint rehabilitation including: wrist, elbow and possibly shoulder or any joint that requires a soft body actuator to aid with bending movement. We detail the design, modeling and fabrication of two types of actuators: Fiber-reinforced Actuator and PneuNet Actuator. Fiber-Reinforced actuator was chosen for the exoskeleton due to its higher force. The Fiber-Reinforced actuator molds were 3D printed, four models were made. Two materials were used to fabricate the models: Dragon Skin 30A and Sort-A-Clear 40A. Two number of windings: (n=40) and (n=25), actuators wrapped with carbon fiber. An air tank was used to supply pressure. The actuators were studied at different pressures. Pressure-force relation was studied, and a close to linear relationship was found. Boa Exoskeleton was made for wrist. Electromyography (EMG) was used; Four EMG receptors were put around the arm. EMG was utilized to actuate the Boa Exoskeleton and record the muscle movement. Five tests were done on six human subjects to validate the Boa Exoskeleton.

Extent

121 p.

Comments

Includes bibliography.|Thesis (M.S.)--Florida Atlantic University, 2018.|FAU Electronic Theses and Dissertations Collection|Includes bibliography.

Identifier

FA00013098

Format

pdf

Download

Share

COinS