Author Type

Graduate Student

Date of Award

2007

Document Type

Thesis

Publication Status

Version of Record

Submission Date

October 2026

Thesis/Dissertation Advisor [Chair]

Dhanak, Manhar R.

Abstract

A microbubble generation system has been designed, constructed, and tested in a circulating water tunnel. A 1.0 m long flat plate was subjected to a flow where the Reynolds number ranged from ReL = 7.23x 10^5 - 1.04 x 10^6. Bubble diameters and skin friction measurements were studied at various airflow rates and water velocities. Bubbles were produced by forcing air through porous plates that were mounted flush with the bottom of the test plate. Once emitted through the plates, the bubbles traveled downstream in the boundary layer. The airflow rate and water velocity were found to have the most significant impact on the size of the bubbles created. Skin friction drag measurements were recorded in detail in the velocity and airflow rate ranges. The coefficient of skin friction was determined and relationships were then established between this coefficient and the void ratio.

Extent

99 p.

Comments

College of Engineering and Computer Science|Thesis (M.S.)--Florida Atlantic University, 2007.|FAU Electronic Theses and Dissertations Collection|College of Engineering and Computer Science

Identifier

FA00012523

Format

pdf

Download

Share

COinS