Author Type

Graduate Student

Date of Award

2021

Document Type

Thesis

Publication Status

Version of Record

Submission Date

October 2026

Thesis/Dissertation Advisor [Chair]

Glegg, Stewart

Abstract

A non-invasive transient state measurement method for wind tunnels would be very valuable as an experimental tool. Traditional measurement techniques for transient flows, e.g., hot wire anemometry, require sensors that are placed in the flow. Alternatively, particle image velocimetry (PIV) may be used to measure transient flows non intrusively, but applying PIV requires sensors that are expensive, and it may take months to process the data. The non-invasive measurement techniques considered in this thesis utilize sensors that are imbedded into the wall of a wind tunnel, or the response of a Kevlar walled wind tunnel to obtain the pressure time histories of a transient flow. These measurements are suitable and accurate for analyzing steady state flows but the feasibility of using them on time varying flows has yet to be explored. If this method proves possible, it would be very beneficial even if it is less accurate than current invasive methods because it would give results in real time. This thesis investigates a simple transient flow of the startup vortex of an airfoil caused by a step change in angle of attack. Based on thin airfoil theory, two models of an airfoil were created. It was determined that the response of a Kevlar wall can measure the unsteady lift of an airfoil.

Extent

98 p.

Comments

Includes bibliography.|Thesis (MS)--Florida Atlantic University, 2021.|FAU Electronic Theses and Dissertations Collection|Includes bibliography.

Identifier

FA00013837

Format

pdf

Download

Share

COinS