Author Type

Graduate Student

Date of Award

1998

Document Type

Thesis

Publication Status

Version of Record

Submission Date

October 2026

Thesis/Dissertation Advisor [Chair]

Masory, Oren

Abstract

One emerging application of parallel manipulators is to use them as CNC (Computerized Numerical Controlled) machine tools and recently several prototypes of such CNC machines have been developed, all based on hexapod machine--a type of parallel manipulators similar to a Stewart platform. The goal of this research is to develop an effective control scheme, cross-coupling control, for this type of CNC machine tools, which will reduce the contouring errors and thus further enhance their advantages. This dissertation describes the research work as follows. Firstly. based on the analysis of the kinematics and dynamics, a PID (Proportional-Integral-Derivative) controller was designed for each leg of the hexapod CNC machine. Secondly, real-time contour error models were developed and verified to determine not only for the calculation of the contour errors of the hexapod CNC machine but also for the general case of any machine tools. Thirdly, the contour errors of the hexapod CNC machine were investigated for a conventional PID controller. The results indicate that the accuracy of the hexapod machine is better than the conventional CNC machine tools even for mismatched axes and load exertion. Finally, a cross-coupling control scheme was proposed for the purpose to enhance the contour accuracy of this new type of hexapod CNC machine tools. A cross-coupling controller design for a 2-DOF platform was performed to provide the guidelines. Then, a cross-coupling controller for the new type of hexapod CNC machine tools was designed by feeding back the contour error to each axis. The efficiency of the proposed cross-coupling controller was verified through simulations. The result shows that the proposed cross-coupling controller is very effective in reducing the contouring errors. While cross-coupling controllers were originally proposed for conventional CNC machine tools, this research is the first attempt of expanding this concept to the new type of hexapod CNC machine tools.

Extent

193 p.

Comments

College of Engineering and Computer Science|FAU Electronic Theses and Dissertations Collection|Thesis (Ph.D.)--Florida Atlantic University, 1998.|College of Engineering and Computer Science

Identifier

FADT12576

Format

pdf

Download

Share

COinS